![](/media/_processed_/0/c/csm_BR26l-p_3a8d4da56e.jpg)
BR 26/Multi-port - pneumatic - DIN
Ball valve
VALVE STYLE
Ball valve
USAGE
- Low-pressure service
- Mixing or diverting service
- On/off service
VERSION
DIN
MEDIUM TEMPERATURE
-10
to 200 °C /
14
to
392 °F
SUPPLY
Pneumatic
VALVE SIZE
DN 15
to
DN 200
PRESSURE RATING
PN 16
to
PN 40
LINING
without
Special features
- Consisting of ball valve and actuator
- Multi-way stainless steel ball valve
- Horizontal three-way version with L- or T-port
- Vertical three-way version with L-port
- Horizontal four-way version
- 90° or 180° travel
- DN 100 and larger with trunnion-mounted ball
- Corrosion-resistant materials to withstand corrosive process media
- DIN ISO 5211 interface as standard
- PTFE V-ring packing loaded by disk springs
- TA Luft
- Blow-out-proof shaft
- Face-to-face dimensions according to DIN EN 558, Series 1
- Leakage requirements according to DIN EN 12266 or API 598
Accessories
- Lever
- Locking facility
- Air filters
Options
- Stem extension
- Special materials
- Gaskets not live loaded
- 5/4-way ball valve (DN 25 and larger)
- Special flow pattern
- Versions with special flanges
- Minimized dead cavities
- Sterile connection
- Heating jacket
- Cleaning connections
- High-temperature version
- Low-temperature version
- Special seat rings
BR 26/Multi-port - pneumatic - DIN can be combinated with the following actuations:
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 5 to 11674 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Power transmission without clearance thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Special features:
- Single-acting and double-acting piston actuator
- Suitable for strict requirements in chemical plants
- Opening angle 90°
- Signal pressures up to 10 bar
- Torques from 18 to 1702 Nm
- Temperatures from –40 to +80 °C
- End positions adjustable within wide range (+5°/–15°)
- Additional pneumatic input at the top shaft end
- Diagonal or parallel square drive position
- Position indicator adjustable in steps of 45°
- Encapsulated spring assemblies
- Backlash-free force transmission thanks to involute gearing
- Direction of rotation reversible without requiring additional parts
- Surface treatment tested by Kesternich sulfur dioxide corrosion test and salt spray test
- Centering ring milled into the housing
- Standardized attachment of valve accessories according to VDI/VDE 3845 or NAMUR
- Simple attachment according to DIN EN ISO 5211
- Blow-out-proof travel stop screws
- Fast stroking speeds as standard
Information
Support
Certificates
Only up-to-date documents are shown in the product selector. Check the documentation site for a list of all documents available.
Pin items on your list and contact us if you have any product-related questions.
Back to product selector